Quick Start Guide

Before You Begin

Make sure you have:

• Iconet Gateway IC-GW-KDZ unit
• Ethernet cable (or PoE switch)
• Access to your electrical panel
• A smartphone or computer with a web browser

Step 1: Mount the Gateway

Mount the Iconet Gateway on your DIN rail inside the electrical panel. The unit occupies 4 DIN modules.

Step 2: Connect Cables

1. Ethernet: Connect the RJ45 port to your network switch (PoE supported)
2. KNX Bus: Connect the KNX bus cable to the green terminal
3. DALI Bus (optional): Connect the DALI bus to the orange terminal

Step 3: Power On

The gateway powers up automatically via PoE. If not using PoE, connect the 24V DC power supply.

Wait for the LED to turn solid green (approximately 60 seconds).

Step 4: Access the Dashboard

Open your browser and navigate to:

http://iconet.local

Or find the IP address on your router's DHCP client list.

Step 5: Run the Setup Wizard

The setup wizard will guide you through:

1. Network configuration
2. Protocol discovery (KNX, DALI, Zigbee)
3. Device import
4. Matter pairing with your smart home app

What's Next?

• System Requirements — detailed hardware specs
• Network Setup — advanced networking
• KNX Integration — KNX-specific setup